The AT2022 is a condenser microphone designed for stereo recording. Two unidirectional condenser capsules in an X/Y configuration pivot to allow for narrow (90) or wide (120) stereo operation. The capsules also fold flat for storage and transportation. Designed for general stereo recording and field sound capture, the AT2022 provides the spatial impact and realism of a live sound field. The microphone comes equipped with a stand clamp, AA battery, fuzzy windscreen and .5 m cable that terminates in a 3.5 mm stereo plug.
Music City Canada is the new home of PA Shop, London Guitars, London Percussion, PA Shop AV Solutions, and Charterhouse Studios. We hope you enjoy this new shopping experience. Visit our new website by clicking here.
X/Y stereo microphone with unique pivoting electret condenser capsules for ultimate flexibility
Provides the spatial impact and realism of a live sound field
Battery operation allows use with most recording devices
Switchable low-frequency roll-off minimizes pickup of unwanted low-frequency noise
User-selectable 90 or 120 stereo operation for narrow or wide pickup patterns
Ideal for general stereo recording and field sound capture
Excellent channel separation
Included fuzzy windscreen offers excellent wind protection
Elements:Fixed-charge back plate, permanently polarized condenser
Polar Pattern:X/Y Stereo
Frequency Response:2020,000 Hz
Low Frequency Roll-Off:150 Hz, 6 dB/octave
Open Circuit Sensitivity:-41 dB (8.9 mV) re 1V at 1 Pa
Channel Balance:<2.5 dB
Maximum Input Sound Level:122 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range (Typical):103 dB, 1 kHz at Max SPL
Signal-To-Noise Ratio:75 dB, 1 kHz at 1 Pa
Battery Type:1.5V AA/UM3 /WARNING: The AT2022 is designed for battery operation only. Do not attempt to use when phantom power is present. Possible damage to the microphone may result.
Battery Current / Life:1.2 mA / 500 hours typical (alkaline)
Switch:Off, on/flat, on/roll-off
Weight:270 g (9.5 oz)
Dimensions:192.0 mm (7.56") long,65.0 mm (2.56") maximum head diameter,21.0 mm (0.83") body diameter
Output Connector:Integral 3-pin XLRM-type
Cable:0.5 m (1.6') long, 3 conductor, shielded, vinyl-jacketed stereo cable with 3-pin XLRF-type connector at microphone end and 3.5 mm (1/8") TRS connector at output end
Accessories Furnished:AT8405a stand clamp for 5/8"-27 threaded stands; fuzzy windscreen; battery; soft protective pouch