PA Shop Logo Orange

We've moved to a new website! Check out MusicCityCanada.com

Focusrite RedNet 4

RedNet 4 adds eight of the latest remote-controlled Focusrite mic preamps / line inputs to your RedNet system through a single Ethernet cable. With two selectable DIs, RedNet 4 provides an effective range of analogue inputs for your system. The unit includes Focusrites world-class precision A-D conversion. Mic/Line/DI selection, gain, phantom power, HPF and metering are also accessible from the front panel. The benefit of remote control microphone pre-amp gain is that you can keep the mic pre close to the source (so the analogue cable run is minimal) while still setting gain stages from the control room.

More from Focusrite
Category: Recording:Hardware:AD Converters

WE'VE MOVED TO A NEW WEBSITE!

Search for this product on our new online store https://musiccitycanada.com

Music City Canada is the new home of PA Shop, London Guitars, London Percussion, PA Shop AV Solutions, and Charterhouse Studios. We hope you enjoy this new shopping experience. Visit our new website by clicking here.



Product Features:
  • Eight high-quality Focusrite mic preamps
  • Selectable line and DI inputs for input flexibility
  • Dynamic range: 119dB
  • THD+Noise: <0.001%
  • Mic input Level up to +16dBu
  • Max mic input gain: 63dB
  • JetPLL jitter-reduction technology


What is RedNet?
RedNet is Focusrites new flagship range of Ethernet-networked studio interfaces, based around the tried and tested Dante Ethernet audio networking system from Australian company Audinate. Focusrites RedNet is the first to offer IP network audio interfaces for the recording studio or any application that requires moving high quality audio around with ultra-low latency.

Microphone Inputs:
  • Gain range:0 dB; 8 to 63 dB in 1 dB steps
  • Type:Electronically balanced, Zin = 2.4 kohms
  • Max. input level:+16 0.5 dB; min. gain for 0 dBFS, Rs = 150 ohms, pad out
  • Min. input level:-47 0.5 dB; max. gain for 0 dBFS, Rs = 150 ohms, pad out
  • Frequency response:20 Hz 55 kHz 0.1 dB (-3 dB @ 80 kHz, fs = 192 kHz); Rs = 150 ohms
  • THD+N:< 0.0007% @ -1 dBFS; +15 dBu input, Rs = 150 ohms, 20 Hz 22 kHz
  • Noise:EIN -128 dB; 60 dB gain, Rs = 150 ohms, 20 Hz 22 kHz
  • Phantom power:48 V, independently switchable per-channel
  • Signal-to-noise ratio:119 dB A-weighted; Rs = 150 ohms


Line Inputs:
  • Gain range:-12 to 42 dB in 1 dB steps
  • Max. input level:+24 0.5 dB; min. gain for 0 dBFS
  • Min. input level:-30 0.5 dB; max. gain for 0 dBFS
  • Frequency response:20 Hz 20 kHz 0.1 dB
  • THD+N: 0.003% @ -1 dBFS; +23 dBu input, min.gain, 20 Hz 22 kHz
  • Signal-to-noise ratio:117 dB A-weighted


Instruments Inputs (Inputs 1&2 Only)
  • Gain range:+14 to 68 dB in 1 dB steps
  • Max. input level:+10 0.5 dB; min. gain for 0 dBFS
  • Min. input level:-44 0.5 dB; max. gain for 0 dBFS, pad out
  • Frequency response:20 Hz 20 kHz 0.1 dB
  • THD+N: 0.001% @ -1 dBFS; +9 dBu input, min.gain, 20 Hz 22 kHz
  • Signal-to-noise ratio:112 dB A-weighted


Analogue High-Pass Filters:
  • Selection:Independently switchable per-channel
  • Frequency/slope:-6 dB @ 65 3 Hz, 12 dB/octave


Crosstalk:
  • Input to input: -80 dB (all other channels at 0 dBFS)


Digital Performance:
  • Supported sample rates:44.1 / 48 / 88.2 / 96 / 192 kHz
  • Clock sources:Internal or from network master device


Power:
  • PSU:Internal, Universal type, consumption 30 VA


Front Panel Indicators:
  • Power:Green
  • Network connected:Green
  • Sync lock:Green
  • Sample rate:Yellow x 5
  • Channel 1/2 source:Yellow x 3 (mic/line/inst)
  • Signal level:Green x 8 (-42 dBFS); Yellow x 8 (-6 dBFS); Red x 8 (overload)
  • Channel select buttons:8
  • Channel function controls:Input source, HPF, phantom power, Gain encoder
  • Channel display:Colour OLED; channel number, input source, gain